Direct Plastics Online Logo
FOR BETTER PLASTICS 
~ AND FASTER DELIVERY!

Direct Plastics Online - Contact Us

 
  Nylon Sheet
Home
Nylon 6 Sheet
Nylon 66 Sheet
Performance Additives
Tolerances


Feedback

  Help
Contact Us
Machining Guidelines
Delivery Areas
Cutting Service
Adhesive Information

Nylon 66 Sheet
Nylon 66 Sheet

Rapid Free Delivery
(on orders over £45)

On Complete Range
of Nylon 66 Sheet

Nylon 66 grade sheet is an extruded nylon sheet grade that is predominantly manufactured in widths of 500mm wide, some manufacturers do produce sheets at 610mm wide. Manufacturers produce the sheet at 3000mm long but we do sell economical alternative sizes to help customers requirements. Nylon 66 sheet is normally manufactured in a range of sizes from 5mm up to a maximum of 100mm thick and there are many thickness variants within the range. Nylon 66 sheet is produced in both natural and black, the latter does have a reduced thickness selection than the natural. The black grade does normally have a MOS2 blended lubricant within the nylon mix which can help with reducing friction and improving component lifespan.

Data Sheet:

Properties Method Unit Nylon 66
Specific gravitiy ISO 1183 g/cm3 1,14
Water Absorption DIN 53495 % 2,4
Chemical Resistance X X X
Max. permissible service temperature - °C 80
Min. permissible service temperature - °C -30
Tensile strength at yeild ISO 527 MPa 90/60
Elongation at yeild ISO 527 % X
Tensile strength at break ISO 527 MPa X
Elongation at break ISO 527 % <40
Impact Strength ISO 179 kJ/m2 o.B.
Notch Impact Strength ISO 179 kJ/m2 4.5/11
Ball indication hardn. (Hk)/Rockwell ISO 1239-1 MPa 160/-
Shore-D DIN 53505 X
Flexural strength ISO 178 MPa X
Modulus of elasticity ISO 527 MPa 3450/1650
Vicat softening temp. VST/B/50 VST/A/50 ISO 306 °C X
Heat deflection temperature HDT/B HDT/A ISO 75 °C X
Coef. of linear therm. expansion DIN 53752 K-1x 10-4 0,80
Thermal conductivity at 20°C DIN 52612 W/(m x K) 0,28
Volume resistivity VDE 0303 x cm 1013 / 1010
Surface resistivity VDE 0303   <1013 / 1010
Dielectric constant at 1 MHz DIN 53483   3,3/3.8
Diel. loss factor at 1 MHz DIN 53483   0,02/0.6
Dielectric strength VDE 0303 KV/mm 27/18
Tracking resistance DIN 53480   CTI600
Bondability     YES
Physiological indifference according EEC 90/128 FDA   0
Friction coefficient DIN 53375   0,35-0,42
Flammability UL 94   X
UV stabilisation     +/0
Acid resistance     X
Hydroxid resistance(delute)     YES
Hydrocarbonat resistance     +/0
CKW resistance     X
Aromatic resistance     +/0
Ketone resistance     YES
Resistance against hot water     +/0
 
 
Direct Plastics Online - FAQ

Direct Plastics Online - Dragster

Direct Plastics Online - Free Delivery

Direct Plastics Online - Credit Cards Accepted

Direct Plastics Online - 3D Secure

Direct Plastics Online - SagePay

 



Tel: 0845 838 3318 - Fax: 0114 256 0809 - Copyright © 2006-2012 Direct Plastics Online